SUEZ Water - Water Technologies & Water

Labwater

Small deionisation cartridges for producing low volumes of purified water

A simple, cost effective method of producing 1 – 10μS/cm purified water at low volumes. Labwater units incorporate an easily replaceable cartridge that changes colour through absorption of ionic contaminants. On complete colour change, replace the cartridge. Units are typically wall mounted and connected via a dedicated hose (supplied separately) to a tap or stopcock and operate direct from water pressure.

Labwater

Small deionisation cartridges for producing low volumes of purified water

A simple, cost effective method of producing 1 – 10μS/cm purified water at low volumes. Labwater units incorporate an easily replaceable cartridge that changes colour through absorption of ionic contaminants. On complete colour change, replace the cartridge. Units are typically wall mounted and connected via a dedicated hose (supplied separately) to a tap or stopcock and operate direct from water pressure.

Unit Specifications

  Labwater 1 Labwater 2
Width (mm) 80
Depth (mm) 100
Height (mm) 580 760
Maximum shipping weight (kg) 2.8 4.4
Maximum shipping weight (kg) 2.5 3.5

System Specifications

  Labwater 1 Labwater 2
Feedwater Potable
Maximum TDS (ppm) 1000
Feedwater temperature 1 – 35oC
Maximum feed pressure (bar) 0.5 – 5
Maximum feed flow rate (l/hr) 30 60
Output @ 50 mg/l tds (soft) 640 1280
Output @ 200 mg/l tds (medium-hard) 160 320
Output @ 300 mg/l tds (hard) 106 212
pH Neutral
Conductivity 1 – 10μS/cm

tds = total dissolved solids

*A trademark of SUEZ. May be registered in one or more countries.